While most companies listen to their consumers to a point, it’s not always clear which ones are actually hearing said consumers. The Blackmagic Cinema Camera has been featured on this site quite a bit — mostly because it's a product many have been looking for: a low-cost option that records to quality codecs without bulky recorders and resolves a full 1080. Blackmagic has done two better, and is offering RAW recording in-camera as well as their professional DaVinci Resolve color corrector all for $3,000 (same price as the Nikon D800 - though the sensor on the Blackmagic camera is not full frame 35mm, it's between MFT and Super 16mm).
We’ve now gotten word from John Brawley that the camera’s firmware is being finalized and it seems Blackmagic is actually listening to suggestions. The camera was originally only going to ship with three options for white balance in its ProRes and DNxHD modes, but now we’re going to get six: 3200K, 4500K, 5000K, 5600K, 6500K and 7500K. This picture appeared on John Brawley's blog showing one of the new white balance settings:
The other problem that many had noticed were the dead/hot pixels in the only test footage that has been released so far. According to Brawley, they have been working hard on the sensor calibration, and those dead/hot pixels are nowhere to be found. From a conversation I had with him on Twitter, it seems like hot pixels shouldn’t be a problem as they have been on DSLRs. Also of note, there is no phantom power -- at least not yet, but there is an on-board mic which should work well as reference audio for syncing sound if you are using dual-system.
The most interesting thing about this camera is that it seems both professionals and amateurs alike are excited by the possibilities. As you can see in these pictures from a French rental house, people are going to get professional lenses on this little guy in no time:
It looks to me like those lenses have been adapted to Canon mount, as most of the PL to Canon adapters I have seen are very large and tend to protrude from the sides -- but it's also possible that it's an adapter I've never seen before. Just like with the Canon DSLRs, a PL mod or lens adapter should work with some lenses. It may only be a matter of time until we see people modding the lens mount to accomplish this task. I've got ideas about modding the entire front with a Micro 4/3s mount, but I'll have to wait and get the camera before I can see if that's feasible. As with any mods, they will certainly render your warranty useless -- so everything should be done with that knowledge.
Too often we have to deal with a tremendous amount of compromises in independent film, and for once a manufacturer is delivering a relatively inexpensive option that resolves a true 1080 image, as well as all sorts of professional quality codecs in-camera without having to spend another penny. Of course, specs don't always tell the whole story, and it will be interesting to see some uncompressed video straight from the camera to really see how it performs.
The family has spent their entire life on a farm, experiencing tranquility by day and horror at night, hiding from the monsters that come out in the dark. One day, Thomas doesn’t return after visiting his crush, Charlotte, at a nearby farm, so Paul leaves the safety of their home to find his son, while Joseph stays back to defend himself against the nightly monster attack.
Edited using Adobe Premiere Pro and Adobe After Effects, “Arcadian”, is a creepy dystopian feature you won’t want to miss, and we sat down with the film’s editor, Kristi Shimek, who shared a behind the scenes look into making this film. RLJE Films will release “Arcadian” exclusively in theaters on April 12.
How and where did you first learn to edit?
I feel like I was always drawn to editing. I enjoyed playing around with my parent’s video camera, and VCRs, and I learned tape to tape and live editing that way. I really didn’t get much experience cutting on NLEs until high school, when I took a media class and realized the power of being able to easily move things around. At university, I became serious about making editing my career and learned a lot more about the technical side as well as the theory of editing.
How do you begin a project/set up your workspace?
My workspace is pretty standard. I always have at least two computer monitors, a preview monitor, a mixer, speakers, and headphones. Sometimes I’m working on my own system, and other times I’m working with something the studio provides, so I try to keep it simple and effective so that I can work with whatever is on offer.
When I’m working on a project, I always talk in depth with my assistant about the easiest way for us to pass things back and forth and keep everything organized. I’m a neat freak when it comes to my project files and hard drives so that’s definitely important for me. I want to be able to move as quickly as possible when I’m in session, and knowing where everything is in the project is an essential part of that.
Tell us about a favorite scene or moment from this project and why it stands out to you.
I have many moments that I love in the film, but one of my favorites is when Thomas and Charlotte go to her tree at the edge of the boundary for the first time. The moment where they are approaching the tree was so fun for me to work with because we distilled what she was saying down and really considered what the most effective visuals would be for the emotion rather than just the information. Then we got into their lovely conversation — it was such a nice, quiet, and gentle moment where we could really take our time, get to know the two characters, and sit with the performances.
Similarly, I love the moment between Paul and Joseph in Joseph’s workshop, where they’re connecting on an emotional level as father and son. This was a scene that we reworked many times to get it exactly right, and what we landed on tells us so much about the characters through expression rather than words. These types of moments are so fun to cut because they really are the heart of the film, and they take a lot of thought and a delicate touch.
What were some specific post-production challenges you faced that were unique to your project? How did you go about solving them?
We needed a lot of technical flexibility on this project. First, we were working with full frame 3:2 footage with a 2.35 sequence as a wrapper. Since the files were so large, we needed to be able to manipulate them a lot in sequence to get exactly what we wanted out of each frame and moment. Premiere Pro is perfect for that because it allows you to easily manipulate the image in sequence — from resizes, to stabilizing, to camera shake, etc.
Ben, the director, and I also worked very closely together, both editorially and with visual effects. He is Premiere Pro and After Effects based, so it was essential for us to work on the platform that would work best for him.
What Adobe tools did you use on this project, and why did you originally choose them?
I cut in Premiere Pro, and then we used After Effects for temp and final visual effects. I would say it was mostly for the flexibility and also the option that the Adobe suite has to roundtrip from Premiere Pro to After Effects and back. Our workflow was really integrated between all of our teams, and when you’re working so specifically and heavily with the footage, it becomes a necessity.
We used Frame.io for notes and reviews on visual effects, as well as some editorial pass reviews. It’s so easy to have the time-coded notes referenced, respond to them within the program, and have the entire team be able to access them as soon as they’re available. I think it makes for much more open communication between the various teams as well.
If you could share one tip about Premiere Pro, what would it be?
Take advantage of the flexibility and the way Premiere Pro is able to playback layer-heavy sequences. Also, take advantage of the tools for temp visual effects like matting and masking, temp color and temp sound to give your project the look and feel that you and the director are going for, and bring it as close to the final product as possible.
The edit is the template of the movie for the rest of the team and is the best way to get the vision across for all of the teams that come after the edit — mixers, final color, VFX teams, etc. — so take advantage of what those tools have to offer to capture every aspect of that vision.
Image Source: RLJE Films
Who is your creative inspiration and why?
Walter Murch has been a huge creative inspiration and influence for me. His books opened my eyes on how to communicate my editorial ideas and how to take the fundamental ideas of editing and build upon them with theories of my own. As an editor, it’s very liberating once you have the language to explain your decisions. His editorial work is just as inspiring.
Murch focuses so much on the emotion of every frame and the connection between shots, and that is something I always try to consider with every cut. Every single shot and edit has meaning, and I want that to be felt in my edits as well.
What’s the toughest thing you’ve had to face in your career and how did you overcome it? What advice do you have for aspiring filmmakers or content creators?
I think one of the toughest things any editor has to face is that we are constantly getting to know new artists, teams, and creatives, and there is always a learning curve when you’re working through each new director’s unique vision. There are also different dynamics between various directors and producers, and a big part of the job is working with a lot of different personalities.
To that end, I would say to any up and coming artists to keep an open mind about notes or critiques received, even if you don’t think it will work. You never know what inspiration can come from trying something, and it builds trust and respect between you and your team. Everyone should feel safe expressing ideas in the edit room, and it is our job as editors to take those ideas and bring the story to fruition through whatever inspiration is found as a team.
Share a photo of where you work. What’s your favorite thing about your workspace and why?
I like to keep a few little things on my desk to remind me to have fun in the edit room. It can be stressful at times, and when you can just take a little glance at something that brings you joy, it brings a moment of relief. I also usually have at least a mug (for coffee or tea) and a water glass, and sometimes a soda as well — I don’t want to get dehydrated in the edit room!